The home button on a smart television is something that you will use regularly. This button is made to be used quite often, and that’s why it is often pressed quite hard. If you’re finding that your home button on your smart TV isn’t working, then there are steps you can take to fix this problem as quickly as possible.

Today, we will be going through some of the common problems with your remote control and how to fix them quickly. Although it may look like a simple device, a lot is going on inside the remote. 

This means that sometimes it can fail without any kind of warning. However, we have found out why and how it fails, and we have prepared a set of steps to follow to fix those problems and get your remote control working again. With these few steps and tips, you will have your remote working just as well as new again!

LG Smart TV Home Button

Troubleshooting & Steps To Fix LG Smart TV Home Button Not Working

Step 1: Initial Setup

Go to Settings on your LG smart TV and find “initial setup” or something similar. This takes you back through all of the settings on your TV, which can help resolve some of the most common intelligent TV problems.

Scan through every setup you’ve initially done on your smart TV, and in most cases, this should help you identify the wrong setup that could cause the remote home button not to work.

Step 2: Check The Batteries

Ensure that your batteries are fresh. Old batteries may not be able to transmit a signal well enough. The remote uses two AAA alkaline batteries. Make sure you are using the right ones.

Remove the batteries, wipe them down with a soft cloth, and then insert them again to make sure they’re facing in the right direction. If you still have issues, try replacing your batteries with new ones.

If that doesn’t work, then recheck the next step.

Related Post: LG Smart TV Menu Keeps Popping Up

Step 3: Turn Of The TV Temporarily

Turn OFF your LG smart TV for a couple of minutes (5 minutes minimum) and turn it ON again. Disconnect it entirely from the power source and wait for some minutes.

If you frequently turn off your TV with the remote control or by pressing a button on the set itself, you will be shocked when it does not work at all one day. 

This can happen because such buttons wear out after a while and lose their sensitivity. When this happens, you will have to perform other turning off your TV that does not involve remote controls.

Step 4: Check Your IR Sensor

If your LG intelligent TV home button is not working, you may have an issue with the IR sensor. Some of the functions and buttons on the LG remote work only via an infrared ray (IR) sensor, so it needs to stay clean and clear from blocking objects.

With the remote still pointing at the IR sensor, try to press any button on your remote control to test that it’s working correctly.

Step 5: Re-Register Your Remote

This will involve using the buttons on the back of your TV to re-register the remote control if your remote is the Magic type.

Most of the time, this is all that’s required to resolve any issues you’re having with your remote, and it fixes everything.

Step 6: Reset To Factory Settings

z

If your remote still doesn’t work, try resetting the TV to its default settings. This will restore the TV to its original state.

Before doing this, ensure all steps above have been tried but failed. Most significantly, the battery replacement.

Step 7: Replace Remote

If replacing the batteries did not solve the problem, try replacing the remote control. To do this, you need to identify the model number and take it to the nearest licensed LG retailer.

Try a local electronics store and purchase a universal remote control if that doesn’t work. The universal remote is compatible with many different brands of television sets.

How Can You Use An LG Smart TV Without A Remote?

Not locating a verified dealer of LG retailed products when you need to replace your remote can be a pain in the ass. 

If you are like me, who does not like generic products, you’d be wondering what alternative to remote do you have? Well, lucky for you, there’s an alternative.

Here’s how you can use an LG smart TV without remote control for free.

  • Use ThinQ App – This app gives you an endless opportunities to control everything on a smart TV. It is straightforward. Go to the app store, download the ThinQ app to your phone, launch it, and ensure both devices are connected to the same Wi-Fi network.
  • Use AndroidTV – Android TV Remote is a must if you want to use your LG Smart TV without a remote. This app can turn your Android phone or tablet into a universal remote that can control your LG Smart TV.

This app allows you to create gestures that can be used to navigate around the interface and get information on what you are watching.

  • Universal Remote Control App – This way of controlling your TV by using your smartphone or tablet will help you save money on buying a universal remote control for it.

Simply download the app on your Google play store and connect it to the same wifi network as your smart TV, and you are good to go.

Related Post: Tubi TV Not Working on Samsung Smart TV

Causes Of LG Smart TV Home Button Not Working

There are many reasons your LG intelligent TV buttons may not be working fine. These reasons include the settings, the remote control, and the television itself. 

1. Batteries – Batteries can be the culprits behind many TV remote problems. It is tough to tell if you have a bad battery in the remote or not. The most significant indicator is if you can’t turn on your TV with the remote, but your batteries may still be working fine.

2. Dust – Dust can block your remote’s sensor, which prevents it from communicating with your TV.

3. Distance – Distance is one of the primary causes for LG remote buttons not working. The operator can be interfered with if you sit more than 7 feet away from the TV.

Thanks for reading this guide to help you fix the LG SmartTV Home Button that is not working. This guide shows you step by step how to take apart your LG SmartTV and fix the home button that does not work.

Related Post: How to Fix Netflix Error UI-800-3 On LG Smart TV

Conclusion

If you have tried the steps above and it does not work for you, Manycontact the LG customer service at https://www.lg.com/us/support/ for further assistance. They may ask for the model number or the serial number of your TV.

About Author

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *